What is Cricut.com/setup? from annie gomez's blog

The Cricut.com/setup or the Cricut Machine is an electric tool designed to cut various material like iron-on transfers, paper and vinyl. The Cricut machine is called the die-cutting Machine and can cut leather and wood.

The Cricut machine can cut the designs at a high quality and speed without the need for cutting tools or an x-acto. This is due to the subscription process and uploading the file or design you wish to use for your project. It also creates a an effortless look. It also lasts for longer and it's not even peeling off. There's no flaking, no cracking and no wrinkles.

The following is the normal procedure to install for the Cricut maker machine first time, and start the first project with the Machine;

• The first step is to connect the power cable from your Cricut maker machine into the machine and on it will connect to the power switchboard.
• Then , take then a USB cord , and plug one end into the Cricut setup machine , and the other end to your PC's device.
• Open the browser on your device.
• In the search bar within the internet browser, you can type in the link Cricut.com/setup.
• Then, search for the URL.
• The Cricut Design Space page should be open.
• After that there will be a Get Started option.
• Click it.
• The next screen will inform you how to connect the Machine to the computer.
• Make sure you follow the instructions provided on the page.
• Turn to the Machine by switching on the switchboard.
• After successful connection, select the Continue button.
• After that, the update the firmware page will be displayed.
• Each time you update your device, you will receive an update for your device.
• Then click to the Select Cricut device option.
• There are two choices from these options Select the Maker option to connect via USB.
• Select it and then click then the Update Firmware option below.
• After you have downloaded the update, restart the Machine.
• The update will be successful.
• Then click the Continue button.
• You will then receive presents.
• You can click to"Accept gifts" in the corner below. Accept gifts option located in the lower right corner.
• You will find the images library with new variations in the Bonus page.
• Click on the Continue button.

If you've purchased the Cricut maker but are unable to get it set up and you're not sure how to set it up, you're at the right spot. The website cricut.com/setup can help you setup the Cricut machine. The cricut design space machine is made to cut vinyl, paper and a variety of other materials into different designs. The Cricut machine is extremely useful in architecture and for work on projects. Today, we will go over the process of setting it up, i.e., Creating the Cricut ID as well as downloading and installing it on the Cricut machine, as well as installing the machine physically. So let's begin.

Follow the procedure below.

• The page to set up your material will appear where you will need to choose the machine.
• The project is made of medium cardstock, therefore choose the Medium cardstock choice.
• Following that it will instruct you to download the Pen.
• Open clamp A , keep it in place and then enter the Pen, keeping the Pen's point towards the bottom.
• Push the Pen to close the clamp, then select the Continue button.
• Then, you can load on the blade with fine points that is already inside the machine.
• However, if the rotary cutter already inside, it is necessary to replace it.
• Remove the edge, then reverse it back downwards and end the clamp.
• It will require more power to open the clamp.
• Then click the Continue button.
• Then, place the white card in the middle align.
• You can get the card stock when you use your Cricut.com/setup machine.
• Put the card stock in place and then roll it onto an machine roll.
• Then, click the Go button on the machine.
• The paper will begin to process which is drawing the image onto that cardstock paper.
• Once you have completed the 200 percent cut, then the process of cutting will start.
• If you're looking for smooth cutting, ensure that you select the blade that is the correct size and shape.