Aluminum Pipe & Tube Manufacturing Guide from Gerald Bell's blog

Before polishing the aluminum pipe, it is necessary to degrease it. Degreasing processes can be selected for treatment based on the amount of sludge contamination present on the surface of the polished parts. The following two degreasing processes are typically used from china aluminium products supplier. The sludge on the surface of aluminum pipes is slightly contaminated and is distributed more uniformly than on the surface of other materials. When we clean, we use a mildly corrosive alkaline cleaning solution. The following are its constituents and operating conditions: It has been shown that sodium silicate is a corrosion inhibitor that can prevent aluminum from corroding. When corrosion inhibitors are used on aluminum parts, a layer of aluminum silicate film is formed on the surface of the parts. Consequently, after degreasing and cleaning, there must be a sludge removal treatment (also known as light out) in a solution containing fluoride ions to ensure that the sludge is removed completely.

The following shapes of aluminium pipes are produced: triangle, circle, ellipse, square, rectangular, concave and convex outside, convex outside the circle, peach-shaped triangle double plane, concave outside the circle, inner rib, U-shape, eight-character, eight-character concave, single plane ellipse, square-round combined tube, flat tube, thin wall, capillary, elbow, and aluminum rod (below 3.0), alu rodThe following are some of the most common applications: camera tripods, electronics, U disks, electric heating, electrical appliances, fiber optic connectors, antennas, styluses, cosmetics, and so forth.

Pipes made of aluminum and aluminum alloys have higher surface quality requirements, but their hardness is not very high, especially when exposed to high temperatures. As a result, extreme caution must be exercised during the manufacturing and shipping processes to avoid contact with sharp or hard objects during the process. Consequently, the product must be better protected during production and lifting, and it must also be handled with care and protection while in use at the job site, among other things. Production on the surface that is civilized.