Proper CS:GO setup from Rick's blog

Optimal settings for the game are the key not only to a good time, but increase the effectiveness of battles. At the same time, you should take into account the fact that if you have never participated in one of the most famous online confrontations between special forces and terrorists, then you should not go over the parameters and settings of cs go. The game has good default settings, due to which it shows itself as beautifully and successfully as possible. It is worth taking on changes only if you already had experience in previous versions of the game or other shooters and have already managed to form your own preferences. It should be understood that setting up cs go is a delicate matter https://apexmap.io/csgo-betting.

Of course, for some, the approach described below will seem blasphemous, especially for those who took part in the development of the game and its drawing, but this will increase the comfort of the game. The bottom line is that most of the CS gamer community believes that extra graphics options distract from the gameplay. Therefore, even on powerful computers, everyone plays with minimal graphics settings. At the same time, if you are a real esthete and appreciate not only the gameplay, but also the visual component, then you can set the settings for yourself.

At the same time, there are several important commands that will improve visibility:

r_dynamic 0 - removes dynamic lighting;

r_cheapwaterend 0 - removes the drawing of the bottom and water;

muzzleflash_light 0 - removes dynamic light from flashes.

Lighting

In the course of practical research, many CS:GO fans have found that the best option for the game is the brightest possible lighting. This has been traced since version 1.6. The peculiarity of this indicator of settings is that the brighter the color scheme is built, the better the enemy will be seen in places where there is little light. Therefore, it is better to bet on an indicator of 1.6 using the appropriate slider.

Sound

Another important cs go setting for any player is the soundtrack. You can often meet players who turn off the sound completely, such a decision is only acceptable if you just went to relax. If there is a serious game ahead, then you should not refuse such an important channel for obtaining information.

The cs go player settings often supplement the standard options through the console using the commands:

snd_front_headphone_position 45 - front sounds are heard better and more "voluminous";

snd_headphone_pan_exponent 1.5 - sounds are heard better with increasing distance;

snd_rear_headphone_position 135 - sounds that are heard from behind - heard better and more accurately.

Aim

This element is the most important and at the same time the most inconspicuous assistant to the player. At the same time, there are no clear instructions for its configuration, the sight setting in cs go is done according to your own preferences. You can customize the cs go sight for a long time using the cs go cfg file.

You can find it in this path C:\Folder where you put Steam\Steam\steamapps\common\Counter-Strike Global Offensive\csgo\cfg

Here you need to find the config.cfg file. It opens with a standard notepad.

map for setting up cs go

Kinds

cl_crosshairstyle 0 - dynamic by default;

cl_crosshairstyle 1 - static by default;

cl_crosshairstyle 2 - classic;

cl_crosshairstyle 3 - classic dynamic;

cl_crosshairstyle 4 - classic static.

Color

cl_crosshaircolor 0 - red;

cl_crosshaircolor 1 - green;

cl_crosshaircolor 2 - yellow;

cl_crosshaircolor 3 - blue;

cl_crosshaircolor 4 - blue;

cl_crosshaircolor 5, 6, 7, 8 - other colors.

Dot

cl_crosshairdot 0 - no dot in the middle;

cl_crosshairdot 1 - with a dot in the middle.

Stroke

cl_crosshair_drawoutline 0 - crosshair without a stroke;

cl_crosshair_drawoutline 1 - crosshair with a stroke;

cl_crosshair_outlinethickness 0 - thickness 0;

cl_crosshair_outlinethickness 1 - thickness 1;

cl_crosshair_outlinethickness 2 - thickness 2;

cl_crosshair_outlinethickness 3 - thickness 3 (the larger the value, the thicker, from 0 to 3).

Transparency

cl_crosshairalpha 0 - the sight is visible;

cl_crosshairalpha 127 - crosshair is half transparent;

cl_crosshairalpha 255 - the sight is completely opaque;

cl_crosshairusealpha 0 - transparency is disabled;

cl_crosshairusealpha 1 - transparency is enabled.

The size

cl_crosshairsize 0 - size 0;

cl_crosshairsize 5 - size 5;

cl_crosshairsize 10 - size 10.

Sight line thickness

cl_crosshairthickness 0, 1, 2, 3 (the more, the thicker);

Distance between lines:

cl_crosshairgap -5 - no distance;

cl_crosshairgap 0 - the distance between the lines is small;

cl_crosshairgap 5 - long distance (you can put any number up to 5 and minus 5).

For those who are looking for an easier way, the map for setting the sight in cs go is perfect, it is called crashz 'Crosshair Generator v2. To access it, you need to go through a small installation procedure.

For this you need:

find a map in the workshop;

subscribe;

in CS:GO itself, click "find a game";

select a card in the section "From the workshop.