LVT Flooring Comes in a Variety of Styles from Gerald Bell's blog
The type of laying for which vinyl floor are designed varies significantly from one manufacturer to the next. The slabs that are prepared for adhesive laying are typically thin in thickness and have an adhesive film pre-installed on the back of the tile. Their installation is straightforward, and some manufacturers employ special glues that enable you to attach and detach PVC plates multiple times. In order to facilitate interlocking, the plates prepared for click laying are thicker than other types of plates. However, they are extremely simple to install and lend themselves more than any other to the faidate, with the undeniable advantage that they can simply be lifted to restore the previous floor in the event of a replacement. It is the thinner staves or rolls that must be glued together using more traditional methods; however, once installed, they can no longer be lifted except through the use of complicated mechanical detachment procedures; on the other hand, they are the most stable vinyls ever used on a flooring surface.
What are the Benefits of a Vinyl Flooring Surface?
There are some advantages directly related to the type of production, as we have seen previously; the best LVTs are distinguished by the quality of their design and by relief in their textured surface, but the main advantage is provided by their simplicity in installation and their thinness.
The ease and speed with which all click or interlocking solutions can be installed is particularly apparent, as it is really only necessary to put the slats or plates together, slide them into the joints, and then seal the joint with a rubber hammer to have a finished product that has a significant visual impact.
Added to this is the fact that the softness of Industrial Vinyl Flooring makes it extremely easy to cut: a simple cutter is all that is required to make all of the cuts that would otherwise necessitate the purchase of expensive equipment and the execution of difficult tasks with other materials. When purchasing interlocking lvc floors, one distinguishing feature to look for is the ability to replace even a single blade without having to lift the entire floor in the event of damage or the need for routine maintenance. Only a few manufacturers are aware of the large number of different types of replaceable blades.
Because of its thin thickness, which varies from 2 to 6 mm depending on the type, it can be installed directly on existing floors, saving money and time by avoiding costly and disruptive demolition work at the same time.
Therefore, when compared to wood, it is more resistant to light because it does not exhibit significant chromatic variations over time, even in areas exposed to direct sunlight.
In addition to being 100% recyclable once discarded, this material is also free of lead, formaldehyde, and solvents, making it a green choice for those concerned with environmental sustainability.
What are the Disadvantages of this method?
First and foremost, it must be stated that we are talking about a product that has not yet reached a sufficient number of years on the market to be considered mature, and the difference between the first vinyl floors and the current ones is extremely significant, indicating that a trend of growth and improvement is still in the process of being established and maintained.
It should be noted that approximately 90% of pvc floors come from China, which is due to the fact that their production is highly polluting, and in order to maintain competitive prices, we procure from countries where anti-pollution regulations are less stringent than those in Europe. Here you will find LVTs that have been manufactured in Europe in accordance with all EU regulations pertaining to the protection and preservation of the environment.
It is necessary to smooth out the previous joints before proceeding with the installation of vinyl because of the nature of the vinyl, which has the property of adjusting to the substrate on which it is installed. If the vinyl is laid over an existing floor and the previous joints are wider than 4 mm, it is necessary to smooth out the previous joints before proceeding with the installation otherwise the underlying joint network may become visible again over time.
To completely eliminate water that has penetrated between the joints of the floor due to significant water leaks, such as those caused by broken pipes, dishwasher or washing machine leaks, it will be necessary to completely dismantle and then reinstall the entire floor. Failure to do so would result in the growth of mold and the production of foul odors, which would result in health risks and foul-smelling environments.
When comparing PVC flooring to porcelain stoneware, we must also consider the fact that PVC floors have a lower scratch resistance than porcelain stoneware. Despite the fact that they are well-made, they will never be able to achieve the technical characteristics of porcelain stoneware or ceramic stoneware.
Amtico Flooring: Robust LVT Floors for High Traffic Areas
Share 2021: Global Trends, Key Players, Industry Analysis Report to 2027
Vinyl flooring for kitchens – 14 floor ideas we can't believe are vinyl
The Best Mop for Vinyl Floors in the Home
The Wall