Peanut Moisture Content Requirement For Shelling from Catherine Liu's blog

Peanut sheller machine is a very common agricultural machinery, which can quickly and efficiently remove the shells of peanuts, thus facilitating subsequent processing and utilization. However, the peanut sheller machine has certain requirements on the degree of dryness and wetness of the peanuts. Let's take a concrete look.

First of all, we need to know that peanut sheller machine shells through friction and vibration. Therefore, if the material is too dry, peanuts will be easily broken, which will affect the shelling rate and cause losses. On the contrary, if the material is too wet, it will easily lead to the increase of adhesion between peanuts and friction surface, and the peanut shells that are too wet will become very soft and difficult to shell off.

Secondly, the peanut sheller machine will generate a certain amount of heat during use. If the material is too dry, it is easy to cause the temperature of the friction surface to be too high, thus damaging the machine or deteriorating the peanuts. Therefore, when using the peanut sheller, we need to pay attention to controlling the degree of dryness and wetness of the material to ensure that it is within a suitable range.

Then, in practice, how do we control the degree of dryness and wetness of materials? This needs to be judged according to the specific situation. Generally speaking, if the material is too dry, we can increase its water content by adding water or soaking; If the material is too wet, we can reduce its water content by sun drying or air drying. Of course, when doing these operations, we need to pay attention to mastering the time and methods to achieve the best shelling effect.

In a word, corn sheller machine has certain requirements on the degree of dryness and wetness of materials. Before processing, we need to check and deal with the wet and dry degree of materials to ensure that they meet the requirements of peanut sheller machine. In the process of use, we should also pay attention to controlling the water content of materials to ensure the shelling effect and the normal operation of the machine.