The Cricut.com/setup or
the Cricut Machine is an electric tool designed to cut various material like
iron-on transfers, paper and vinyl. The Cricut machine is called the
die-cutting Machine and can cut leather and wood.
The Cricut machine can cut the designs at a high quality and speed
without the need for cutting tools or an x-acto. This is due to the
subscription process and uploading the file or design you wish to use for your
project. It also creates a an effortless look. It also lasts for longer and
it's not even peeling off. There's no flaking, no cracking and no wrinkles.
Cricut.com/setup
maker First time using the machine?
The following is the normal procedure to install for the Cricut
maker machine first time, and start the first project with the Machine;
- The first step
is to connect the power cable from your Cricut maker machine into the
machine and on it will connect to the power switchboard.
- Then , take
then a USB cord , and plug one end into the Cricut setup machine , and the
other end to your PC's device.
- Open the
browser on your device.
- In the search
bar within the internet browser, you can type in the link
Cricut.com/setup.
- Then, search for
the URL.
- The Cricut
Design Space page should be open.
- After that
there will be a Get Started option.
- Click it.
- The next screen
will inform you how to connect the Machine to the computer.
- Make sure you
follow the instructions provided on the page.
- Turn to the
Machine by switching on the switchboard.
- After
successful connection, select the Continue button.
- After that, the
update the firmware page will be displayed.
- Each time you
update your device, you will receive an update for your device.
- Then click to the
Select Cricut device option.
- There are two
choices from these options Select the Maker option to connect via USB.
- Select it and
then click then the Update Firmware option below.
- After you have
downloaded the update, restart the Machine.
- The update will
be successful.
- Then click the
Continue button.
- You will then
receive presents.
- You can click
to"Accept gifts" in the corner below. Accept gifts option
located in the lower right corner.
- You will find
the images library with new variations in the Bonus page.
- Click on the
Continue button.
Cricut.com/Setup
If you've purchased the Cricut maker but are unable to get it set
up and you're not sure how to set it up, you're at the right spot. The website
cricut.com/setup can help you setup the Cricut machine. The cricut com setup machine
is made to cut vinyl, paper and a variety of other materials into different
designs. The Cricut machine is extremely useful in architecture and for work on
projects. Today, we will go over the process of setting it up, i.e., Creating
the Cricut ID as well as downloading and installing it on the Cricut machine,
as well as installing the machine physically. So let's begin.
How do you
set up the material in your Cricut.com/setup Maker machine?
Follow the procedure below.
- The page to set
up your material will appear where you will need to choose the machine.
- The project is
made of medium cardstock, therefore choose the Medium cardstock choice.
- Following that
it will instruct you to download the Pen.
- Open clamp A ,
keep it in place and then enter the Pen, keeping the Pen's point towards
the bottom.
- Push the Pen to
close the clamp, then select the Continue button.
- Then, you can
load on the blade with fine points that is already inside the machine.
- However, if the
rotary cutter already inside, it is necessary to replace it.
- Remove the
edge, then reverse it back downwards and end the clamp.
- It will require
more power to open the clamp.
- Then click the
Continue button.
- Then, place the
white card in the middle align.
- You can get the
card stock when you use your Cricut.com/setup machine.
- Put the card
stock in place and then roll it onto an machine roll.
- Then, click the
Go button on the machine.
- The paper will
begin to process which is drawing the image onto that cardstock paper.
- Once you have
completed the 200 percent cut, then the process of cutting will start.
- If you're
looking for smooth cutting, ensure that you select the blade that is the
correct size and shape.
