danielpower's blog
If you have made a decision to make highly precise dot generation at different work distances, even though it is far enough to reach, not simply relying on simple green laser pointer or any other manual dot projecting tool, it would be a much better solution for users to operate a highly bright beam emitting device, such as a 532nm green laser diode module. It keeps works with high brightness and highly visible green laser light source generation. Under operation with the lowest laser beam divergence and the special TEM00 laser beam mode, either it is pointing at close long distance, this industrial stabilized devices has just assured the best quality green laser light source generation, and the clearest green reference dot projection at various work distances effectively.
The usual use of 532nm green laser diode module is always working for a quite long time. It is a major issue for users to assure its stable performance. The basic use of a metal head sink cooling system is configured into the durable anodized aluminum alloy housing. When it applies advanced 532nm green DPSS laser system within wide range outfall of 5mW to 100mW, this 532nm green dot laser has just adopted different dimension tube of 16mm and 26mm diameter. In process of long lasting dot indication work, it always leaves enough space for tube cooling down and achieves highly reliable green reference dot generation within daily operating time of eight to ten hours per day in proper use.
Under operation of the best quality glass coated Lens and a glass window inside the durable anodized aluminum alloy housing tube, after a series of strict laser beam stability tests and aging preventing test, this 532nm green laser diode module is always working well with the best quality green laser light source generation, and the clearest dot indication within wide range distance of 25 meters and highlighting working. Unless it is pointing under sunlight, this 532nm green dot laser is able to provide users excellent dot alignment solution for laser marking, laser engraving, drilling system, military targeting and high Tech work etc.
It is operating easily and conveniently as an accessory part. Unless it is pointing under sunlight, users should only make correct use of output power and proper adjustment to correct position. It brings users easy and quick green dot indication. Being made with different dimension tube of 16mm and 26mm diameter, whatever kind of working surface it is pointing, the 532nm green laser diode module is operating easy and quick as an accessory part. It allows easy, quick and no barrier dot indication onto any vertical or horizontal work surface. There's also no barrier caused by long distance, high height or other hand reaching places, etc.
Under conditions that green alignment laser makes freely adjustment of both laser beam focus and laser dot projecting direction, it enables the most concentrated green laser light generation and increasing accuracy green dot projection at a greater distance and highlight working occasions. Under conditions that users are taking laser safety measures and wearing correct laser safety glasses, without any eye explosion to beam aperture, users are always making easy and secured green dot indication in all application fields effectively.
What is an easy job to make precise and fine enough line alignment? It might be processing at various work distances, not easy to reach with manual line drawing work, it just takes the lowest time to get ideal line aligning result with a 532nm green line laser module. It is applying for various industrial and high tech precise line aligning work fields. On the basis of a qualified glass coated lens with wide fan angles and good use of cooling system, only after its proper mounting onto any other industrial device or equipment, this laser line generator makes sure of high precision and high fineness green line projection for a lot of application fields.
This 532nm green line laser module is always applying for various industrial precise line measuring work fields. It is projecting the most visible and the brightest green laser light from a middle wavelength of 532nm green DPSS laser system. When it is trying to make long lasting line aligning work, owing to its special use of a metal heat sink cooling system inside highly durable anodized aluminum alloy housing tube, it is always working well with high density green laser light emission. Within constant green laser line alignment of 8 to 10 hours per day, this green laser line generator gets excellent laser light cycling use, and highly reliable green reference line projection for multiple work fields.
Owing to advanced use of a qualified glass coated lens within 10 to 110 degree, cooperating with a series of beam stability tests, this 532nm green line laser module is performing well with high linear quality and highly straight green reference line within 0.5 meter to 6 meters. When it gets less than 1mrad laser beam divergence and special TEM00 laser beam mode, it gets ultra fine line fineness. Within quite long work distance of 25 meters, only after its correct use of output power and optic lens degree, this 532nm green laser line generator always makes highly precise green line alignment for both industrial and high tech precise line measuring work fields.
After the use of APC, ACC driving circuit board, available with wide range output power of 5mW to 100mW, this 532nm Gaussian beam green line laser module is performing well with the most reliable green laser beam and green line projection. It enables long lasting line alignment and reduced tube burning out or damage in proper use. Any time users are taking laser safety issue and wearing correct laser safety glasses, without any worrying about thermal energy hurt to eyes, this alignment laser always brings users easy and secured line alignment in proper use perfectly.
When users are trying to make highly clear dot measurement at quite long work distances, it might be out of hand reaching and other hard reaching places, it is not easy job to get ideal dot aligning accuracy easily. However, a lot of users would prefer to make dot measurement with a 445nm blue laser diode module. In various type of industrial and high tech precise dot measuring work fields, after correct use of output power and easy mounting onto industrial machine or device, it just assures easy reaching, good direction and long lasting blue dot measurement for both industrial and high tech precise dot measuring work fields effectively.
Available with an import 445nm blue laser diode within 50mW to 100mW, comparing with formal blue laser pointer, this 445nm blue laser diode module always gets increasing laser beam stability of at least 40%. It is in need to work for quite long time. From the very beginning design, it is adopting a metal heat sink cooling system, which is getting even better thermal emitting than formal air or water cooling system. Although it is not as bright as a 473nm blue DPSS laser system, even though it gets high power, however, this blue dot laser alignment just adopts quite small size tube diameter of 16mm.
Being made with qualified glass coated lens, and special use of a glass window in front of laser beam aperture, this blue laser diode module is keeping work with high transmittance blue laser light emission. Under operation of those of special occasion of moisture or dust, it still gets no appearance of laser light decay or blur. It generates highly clear blue reference dot projection within long lasting distance of 25 meters and maximum work time of 8 to 10 hours per day.
According to real work distance and lighting occasion, only after correct use of output power, this blue laser diode module is not only projecting quite charming and attractive blue laser light, but also making good job for highly clear blue dot projection for industrial precise dot measurement, laser show, laser displaying, decoration, high tech and lab experiment work etc. When blue alignment laser makes freely adjusted laser beam focus and dot emitting direction, it gets highly concentrated blue laser light, increasing accuracy and brightness blue dot projection at great distance. At the same time, any time users are paying high attention to powerful blue laser radiation and reflection, after correct wearing of 445nm wavelength preventing laser safety goggles and avoiding eye exposure to laser beam aperture, it just assures easy and secured dot measurement in long lasting use.
In various precise and fine line measurement at various work distances, unless the use of sunlight, it is always making good job with a 635nm red line laser module. It is generating pure and bright red laser light from a 635m red laser diode, cooperating with a metal heat sink cooling system and different size tube diameter, it assures good thermal emitting, and highly stable red line alignment in continuous use.
Available with qualified glass coated lens within 10 to 110 degree, and up to 24 hours aging preventing and beam stability tests, this red laser line generator is keeping work with highly straight and fine red line within 0. 5 meter to 6 meters. It enables easy installation and adjustment of both red line fineness and red line emitting direction, not limited by any manual labor force input or high height, it assures low cost, and long lasting line measurement for laser cutting, sand milling, laser car wheel alignment system, lumber machine and high tech work etc.
In any type of highly clear and accurate dot alignment in various industrial and high tech work fields, it is operating easy and quick with a Berlinlasers 635nm red laser diode module. It is projecting pure and bright red laser light from a 635nm red laser diode within 5mW to 100mW. Cooperating with qualified glass coated lens and glass window, it is working well with high transmittance red laser light and highly clear red dot alignment under moisture or dust as well.
This 635nm red laser diode module applies different size tube diameter of 16mm and 26mm, cooperating with extending electric wires, it enables the maximum installed distance of 3 meters, and easy reaching of red dot emission. After freely adjusted laser beam focus and dot emitting direction, it assures the brightest and the lowest price dot alignment for riling system, laser marking, laser engraving, high tech etc.
https://www.berlinlasers.com/635nm-red-laser-diode-module
https://www.berlinlasers.com/high-power-635nm-150mw-500mw-red-laser-diode-module
https://www.berlinlasers.com/oem-lab-lasers/laser-diode-modules
https://www.berlinlasers.com/
