© Copyright khedmeh Wall
The war between these Copper Magnet Wire and aluminum wire metals continues to rage on; both vying to become the number one contender as the ideal component for windings in a transformer. Due to both metals being thermal and electrical conductors, they often cross paths. However, it’s usually down to the individual preferences of the person designing, or specifying, the transformer, as to which one gets the nod.
Aluminum Wiring
Like copper, aluminum is conductive, so it’s become a common material used in the construction of electrical wiring. Unfortunately, aluminum wiring isn’t as strong as copper wiring, and it also has a higher thermal expansion coefficient. With that said, there are still advantages to using aluminum wiring.
Aluminum wiring almost always costs less than copper wiring. It’s not uncommon for aluminum wiring to cost just half the price of copper wiring. For a residential home, using aluminum wiring instead of copper wiring can save builders several hundred dollars. For a commercial building, the cost-savings benefits of aluminum wiring can be thousands of dollars.
In Conclusion
Copper Wiring
For over a half-century, copper wiring has been used in residential and commercial electrical systems. It’s often preferred, in fact, over aluminum wiring because of its high tensile strength. The tensile strength of copper is roughly 40% higher than that of aluminum. With a higher tensile strength, copper wiring is less likely to break than aluminum wiring. This is important considering that electrical wiring is often installing by pulling it through ports and feeders. If the wiring is weak or fragile, it may break during installation. Copper wiring has a high tensile strength to protect against breakage as well as other forms of physical damage.
Copper wiring also has a lower thermal expansion coefficient than its aluminum counterpart. In other words, it doesn’t expand as much as aluminum wiring when exposed to heat. The temperature of electrical wiring increases as electricity flows through it. Aluminum wiring has a higher thermal expansion than copper wiring, resulting in greater expansion. If the wiring expands too much, it may cause areas in which the wiring is spliced or joined to break.
To buy the Enameled Copper Strip from a manufacturer online, you need to make sure that the manufacturing company is reliable and reputed. The company should only offer quality products which abide by global and local quality standards. The products must also be thoroughly tested to make them completely safe for use. Xinyu has built its reputation on delivering wire sourcing solutions for its customers. With the largest, most varied inventory of Enameled Wire and Enameled Copper Strip found anywhere. You can click https://www.xinyu-enameledwire.com/product/magnet-wire-magnetic-wire/ to learn more information.
The difference between aluminum and enameled flat copper Wire is largely in their usage within utilities, resistance, conductivity, weight and cost. Aluminum is in use by the utility companies for the transmission of electricity since the early 1900’s. Aluminum seems to have more advantages over the older copper wire in terms of weight, flexibility and cost, as it is lighter, more flexible, and less expensive.
Aluminum Wire vs Copper Wire
For its ease of use and ability to effectively conduct electricity, copper is the best kind of wiring for your home. Copper wiring is more stable than aluminum and smaller conductors are needed to transmit power loads. Overall all it is more durable and performs better than aluminum wiring.
One of the disadvantages of copper wiring is its cost. So, if extensive wiring is required, the cost of using copper could be too expensive for some homeowners.
There are, however, many advantages to using aluminum wiring. Aluminum is much lighter and malleable than copper and therefore, makes it easier to work with. Being a cheaper metal, it can be more cost-effective to install aluminum wiring as it will generally work out around half the cost of copper wiring.
The disadvantage of aluminum wiring is that it must be installed correctly to avoid the risk of house fires. When a current runs through aluminum wiring it causes the metal to expand. This creates a cycle of expanding and contracting called “cold creep.” In time, this can cause connections to become loose and spark. If the wires heat up too much, they could even melt fixtures and cause a fire. This can be easily corrected and the hazard avoided by replacing the connection cap with one rated for copper and aluminum and ensuring the final connection to the device is made with copper. This is a cost efficient alternative to rewiring your house, and is an accepted method recognized by insurance companies.
In the end, both types of wiring have their advantages and disadvantages. In some electrical installations, aluminum wiring has its place. However, because copper wiring is generally safer and conducts electricity better, more people choose copper wiring over aluminum when rewiring or installing a new electrical system in their homes.
To buy the Enamelled Wire from a manufacturer online, you need to make sure that the manufacturing company is reliable and reputed. The company should only offer quality products which abide by global and local quality standards. The products must also be thoroughly tested to make them completely safe for use. Xinyu has built its reputation on delivering wire sourcing solutions for its customers. With the largest, most varied inventory of Enameled Wire and Enameled Copper Strip found anywhere. You can click Xinyu-enameledwire to learn more information.