WOW CLASSIC RECEIVES LAYERING CHANGES
During a recent blue post from a community manager on the forums, Blizzard detailed new changes coming to the layering system used to help servers survive the launch of WoW Classic. Apparently layering has worked as Blizzard intended so far and some realms have reached their end-state of a single layer. Most servers saw a maximum of three layers during the beginning days of Classic WoW and almost all realms narrowed down to two layers shortly after. Classic WoW brings Azerothians back to the early days of World of Warcraft and it is presently available for PC around the world.To get more news about Buy WoW Classic Items, you can visit lootwowgold news official website.
The realms Blizzard has permanently set to one layer are: Anathema, Arcanite Reaper, Ashkandi, Azuresong, Deviate Delight, Earthfury, Felstriker, Heartseeker, Netherwind, Old Blanchy, Remulos, Smolderweb and Windseeker in the US region. For the European region, Bloodfang, Dragonfang, Earthshaker, Hydraxian Waterlords, Judgement and Ten Storms are permanently set to one layer as well.
“As we’ve said before, we will have all realms on a single layer before introducing world bosses and a great deal of progress has been made towards that goal,” said Community Manager Kaivax. “First and foremost, players have leveled up and spread out around the world. This allowed us to accommodate more players per layer, which means fewer layers required per realm.”
This transparency between Blizzard and the WoW Classic community is refreshing as they add that the realm selection screen will indicate the layer status instead of the realm population. Servers that aren’t affected by layering will remain showing low, medium or high which represent the servers population.
Did you ever notice the layering when playing Classic WoW or watching a stream of it? Do you remember experiencing a lot of disconnects or latency during previous iterations of World of Warcraft? Let us know in the comments below!
The MMO That Changed the World Returns With WoW Classic
Blizzard
announced during Blizzcon 2017 that WoW Classic servers were on their
way after years of anticipation. Ever since Wrath of the Lich King, fans
of World of Warcraft have wanted official Blizzard servers set in the
base, vanilla experience of the original in 2004. J. Allen Brack, the
executive producer of World of Warcraft definitively said Classic
servers would never release at Blizzcon 2013, following the “No!” with
“and by the way, you don’t want to do that either. You think you do, but
you don’t.” Well, despite the conflicting statement, WoW Classic
servers are officially live and available to anyone with an active World
of Warcraft account on PC or Mac.To get more news about Buy WoW Shadowlands Gold, you can visit lootwowgold news official website.
After the success of World of Warcraft Classic breathing new life into
the dying franchise, we can definitively say: No, J. Allen Brack, you
think we didn’t want to do that, but we did. Twitch views are up, WoW
Classic YouTube content is flooding the platform, Blizzard hasn’t given
us official server population numbers, but judging from the plethora of
people on the one server I’ve played on so far, it’s safe to say that
the World of Warcraft is as alive and well as ever. Especially
considering the current client of the game isn’t experiencing a complete
lack of players. No matter how you slice it, WoW Classic has done for
the aging MMORPG what several of the expansions couldn’t do: maintain
hype and engagement for more than a couple of weeks.
Classic WoW returns gamers to the original Azeroth that started the World of Warcraft machine (specifically patch 1.12) that took the leadership role of the MMO genre and maintained it to this very day. While many of the best things from Vanilla WoW are alive and well in WoW Classic, it also features several of the same bugs, imbalances and other quirks that made it great. Action bars are once again packed with abilities and talents which were stripped from the game in Mists of Pandaria in an effort to appeal to casual gamers.
The community carries the Classic World of Warcraft experience as it did fifteen years ago. In my experience, I came across multiple examples of people helping each other and me. I watched high-level guildmates help their friends through zones full of enemies with Skulls and question marks indicating their levels. I requested a tailor in trade chat and they’ve made every bag I’ve equipped ever since. I saw people giving coin to complete strangers so that they can obtain their new skills, which is no longer a thing in today’s version. None of this would have been appreciated for what it is if WoW Classic had the layering system of the live version of the game which combines multiple servers to populate the world around you. If you make a character on Smolderweb, that’s your server. When you play on it, you’re playing with other people from Smolderweb and although people have manipulated the toned-down version known as Sharding, the system is mostly foolproof according to Blizzards internal testing.
WoW Classic Warrior Guide
Warriors are one of the most complex and powerful classes of World of Warcraft Classic. Not only are they the chief tank class, they are also the only class that is able to excel at two roles: Tanking and Melee DPS.To get more news about Buy WoW Gold Classic, you can visit lootwowgold news official website.
This is a unique niche in WoW Classic – compare this to example to Druids, who can potentially fill four roles (Tank, Healer, Melee DPS, Ranged DPS), yet are not able to really stand out at any of these roles.
Meanwhile, Warriors can become one of, if not the best, melee DPS and their place as the preeminent tank of WoW Classic is indisputable. Despite oftentimes being shoehorned into the tank role, playing a Warrior thus offers you a certain degree of flexibility should you ever want to swap roles.
It also makes it possible to primarily play DPS and yet fill off-tanking duties in raids.
Warriors are generally not great in 1 v 1 PvP, but, given the right gear, talents and support, can be a force to be reckoned with in Battlegrounds and World PvP.
In all honesty, Warriors are one of the most skill-intensive classes to play and newcomers often find especially tanking to be daunting at first. PvP is no less complex with constant changing of stances and a variety of different builds.
Our main motivation in this article is to reduce the complexity for new players and and also to bring veterans back on track.
Diode Dynamics 9012 SL1 LED Headlight Pair
LED bulbs are legal
in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and
not street legal in the USA for Headlights. Legal for off-road use in
ATV, snowmobile, and off-road racing use. International legality varies
by country. To get more news about 9012 LED headlights, you can visit iengniek official website.
Note: This usage regulation is not unique to Diode Dynamics bulbs. All
LED bulbs from all brands, regardless of marketing claims, are
prohibited from street use in halogen headlights in the USA.
SL1 LED Bulbs
Aftermarket or OEM? If you're looking to improve visibility on your vehicle at night, you've probably found many options for LED upgrades. Most bulbs on the market are too big to install, don't work with the electrical system, and have no focus or hotspot in the beam pattern. Even if they come close on those aspects, they still aren't anything close to the quality you would find with factory-installed lighting. Like most aftermarket products, most LED bulbs are not engineered and tested for long-term reliability.
With the SL1 LED, Diode Dynamics set out to engineer a true OEM-grade solution. With its compact size, optically correct output, flow-simulated cooling, and boost-mode electrical circuit, our SL1 LED patented design is a properly-engineered solution that finally provides a true upgrade in performance , with high reliability: and it's tested and validated to meet those standards, just like OEM lighting.
Compact Size. Your order includes two bulbs, to replace the factory bulbs in your vehicle. The bulbs are compact in size, in a patented design that isn't much bigger than the original halogen bulb. The drivers are compact too! If you have a sealed lamp, they are designed to fit inside. The drivers and bulbs are tested to last over time, even when sealed inside. Please see further information on Vehicle-Specific product listings, or contact us.
Street Legal Output. Don't be fooled by high lumen numbers. Your vehicle's lamps are designed as a system, to Focus light. If the light source in that system is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road, you'll just have more glare. To correct this, the SL1 LED bulb was engineered with advanced optical design software, which simulates each ray of light in a process known as ray tracing. Using this tool, our engineers perfectly matched the filament location, allowing the SL1 LED to Focus light just like your original bulb, preserving the focus and hotspot, with no added glare. This is a safe, functional output, in compliance with photometric standards.
Tested to Perform. We test the SL1 bulb in factory lamps, and measure the entire beam pattern using specialized equipment. It's an elaborate affair: a lamp is mounted to a computer-controlled rotating head called a goniometer. Light shines down a tunnel, where a sensor collects data as the light is rotated. The entire beam pattern is mapped, and we compare the total output to the original halogen. With proper optical engineering, testing, and validation in the application, we can assure correct optical performance .
Staying Cool. You may have seen bulbs that use large straps for cooling, or big fans that just make noise. These bulbs still run hot, pushing the LEDs past their limits, resulting in degradation of output after a few months. When it comes to cooling, proper engineering is required to efficiently remove heat from the bulb. In the SL1, it comes together as a whole system that was extensively tested, with dozens of iterations to achieve the best cooling performance possible. It includes a direct-solder copper core board, thermal phase-change interface material, and thermally-modeled zinc casting get heat to the base, where base fins are designed for aerodynamic performance in conjunction with the flow rate and pressure of the Sunon bearingless microfan. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential.
Nighteye 9006 HB4 LED Headlight Bulbs 6500K White 8000LM Light Conversion Kit
Fitting
to H11 types of Auto Vehicle Truck Van SUV ATV Motorcycle Bike, such
as: Chevy Volkswagen Dodge Nissan Kia Porsche Toyota Mitsubishi Honda
Audi Benz etc.To get more news about hb4 led headlights, you can visit iengniek official website.
Attention: Please check the LED light base type and size of your vehicle to confirm if the item will fit it.
Specification:
Light type: 9006
Condition: 100% Brand New
Light Color: 6500K White
Power: 50W/Set(25W/each bulb)
Lumen: 8000LM/Set(4000LM/each bulb)
Light Source: FOR CSP LED CHIPS
LED Quantity: 6PCS LED/each bulb
Work Voltage(V): DC9V-32V
IP Rate: IP68
Life Span: Over 100,000 hours
Viewing Angle(?)?360°
Working temperature: -40~80?
Certificates: CE, RoHs
TURBOSII 9004 HB1 LED Headlight Bulbs
LED Power:Cool white
6500K color temperature;Dual High/Low beam – High brightness,6000LM high
beam and low beam;DC 12-24V operating voltage,waterproof IP65;30000hrs
operating life.Super bright white LED Headlights bulbs replace HID Xenon
and original Halogen Lamp.To get more news about 9004 LED headlights, you can visit iengniek official website.
High Performance:Excellent lighting performance with high
brightness;High lighting efficiency LED COB;Frosted heatsink which
designed with radiation heat dissipation and cooling paint;flexible with
great quality;Efficient heat dissipation.
Please confirm the
headlight bulbs size and model of your vehicle before palce the
order.And if you have any questions about bulb adaptation models,please
contact us without hesitation! Free return for refund within 60 days if
not satisfied. NOTE:VW BMW Volvo Mini Cooper Benz series may have canbus
issues,pay attention to buy.
Design Features:All in one design,just
plug and play.Internal constant current CPU,over-heated
protection.Enhance lighting efficiency and stabilization;Maximized 360
degree beam angle,enhance 30% of effective range compared to halogen
lamp.
Package Included:pair 9004/HB1 led headlight bulbs with driver ballast,1x user manual.1 year warranty.
Light source introduction:special LED light source for automotive.
Super brightness led chip by the top technology light source brand.
6063 aircraft grade aluminum: applied pure aluminum ingot,pure
magnesium,mixing with aluminum and silicon metal,easy cutting, good at
corrosion resistance.
Super heat dissipation and pressure resistance. exquisite surface oxidation treatment.
Drive Advantage:
Integrally molded power inductors, Above 30000 hours long life
capacitors,Large-capacity ceramic capacitors, the United States IR power
MOS.
lighting at minus 45 degree is normal, The test is normal when lighting at 80 degrees for 90 consecutive days
EMC standards: According to the International Organization for
Standardization to develop ISO7637-2:2004 and GB/T21437-2008
standards,it adopts superior EMC.
Anti-jamming circuit design which
is no electronic interference and does not affect the original car radio
and other electronic equipment.
Easy installation:
For most vehicles, just Plug-N-Play, car installation manual included.
Yet for some European vehicles or newest version, your vehicles may
require to install the load resistor or decoder to avoid the error coder
or blinking-off issues.
Enjoy the power of HID with the benefits of Cree LED technology. To get more news about H9 LED headlights, you can visit iengniek official website.
The only LED bulb to have both TUV and E13 certifications. The toughest
regulatory board in the world! Do not be fooled by the imitators!
New for the fall of 2018 is the redesigned 4.8 Bulb, all metal construction, better beam patterns, Brighter.
This powerful 4800 Lumen LED Headlight Bulb works on H8, H9, and H11 and
features forced fan cooling as well as an electronic thermal system for
exceptional durability and long life.
We do not recommend this bulb for Toyota or GM mid sized trucks using
daytime running lights, If you have a GM truck you know the issues with
the failing headlights, especially in the Canyon and Colorado pickups.
Also, any other vehicle with daytime running lights. We cannot warranty
bulbs used in these vehicles on any purchase made after May 25 2018.
- Easy Install
- Instant Start
- 4800 Lumens
- 5600K
- One Year Warranty
Please note: Requires DC power. Most vehicles that use H8, H9, and H11 bulbs, (with the exception of some snowmobiles), will have DC power.
Bavarian Premier Markus Soeder ruled out running to succeed Angela Merkel as German chancellor, saying he wants to focus on leading the southern German state despite a surge in his popularity on the national stage.To get more news about WikiFX, you can visit wikifx news official website.
Soeders standing among voters has been burnished by what is widely perceived as an impressive performance during the coronavirus crisis, and the 53-year-old from Nuremberg is the second-most popular German politician behind Merkel. He is well ahead of other challengers to succeed her when her term ends in the fall of 2021, according to recent polls.
Soeder heads the Christian Social Union, the Bavarian sister party
of Merkel‘s Christian Democratic Union. Traditionally, the CDU has
fielded the conservative group’s chancellor candidate, and both times a
CSU member ran — Franz Josef Strauss in 1980 and Edmund Stoiber in 2002 —
they were unsuccessful.
“There are good reasons why the CSU has never provided the
chancellor,” Soeder said in an interview with Bild am Sonntag newspaper.
“I will help with all my strength to make sure things go well for
Germany but my task is in Bavaria.”
Soeder reiterated his intention of staying put in comments to broadcaster ARD later on Sunday. Asked directly whether he would rule out running, he said: “My place is in Bavaria and so that is clear.”
“There was a recent poll in Bavaria in which a majority of
Bavarians believed I could do a job like that in Berlin but the same
majority wants me to stay in Bavaria,” he added. “And for me thats
really a very, very strong indication, a powerful argument. In addition,
the CDU always has first rights on nominating a candidate.
Possible Merkel successors from the CDU include North Rhine-Westphalia
Premier Armin Laschet and former caucus leader Friedrich Merz. Social
Democratic Finance Minister Olaf Scholz, who is the vice chancellor in
the ruling coalition, and Greens co-leader Robert Habeck, are also in
the running for the top job.
In a direct vote for chancellor, Soeder would win 41% of the vote, Habeck 20% and Scholz 14%, according to a Forsa poll for RTL/n-tv published Saturday. If Laschet were the conservative candidate, he would get only 19%, compared with 20% for Habeck and 19% for Scholz, the poll showed.
Soeder told Bild that there is no need for Merkels conservative bloc to rush to select its candidate. The CDU must first choose a new leader at a party meeting in early December after Annegret Kramp-Karrenbauer decided to step aside.
“We‘ll think about the timing of choosing the chancellor candidate after the CDU congress,” Soeder said. “It doesn’t have to be January, it also may not happen until March. A drawn-out election campaign with an active chancellor doesnt make much sense.”