© Copyright khedmeh Wall
The YUNENG vacuum transformer oil purifier provides the following benefits:
1. It provides the benefits of quick purification and protection of oil purity.
2. The transformer oil purification system incorporates online adsorption filter renewal and low-temperature physical adsorption (reduction of dielectric loss, decolorization, and deodorization).
3. The oil filter is particularly well suited for the filtration and purification of transformer oil or other insulating oils that operate at high voltages or ultra-high voltages.
4. Be equipped with cutting-edge parts, procedures, and a comprehensive after-sales service system.
5. The filtering of insulating oil, including degassing, dehydrating, and restoring dielectric strength, among other things, is possible with the oil purifier. It may totally eliminate dissolved gas, moisture, solid particles, and contaminants by dehydration, degassing, filtration, and other procedures.
6. This oil filter machine is one of the most effective and long-lasting high vacuum oil filter devices available today.
China's YUNENG is a renowned producer of oil filtration equipment. It is able to manufacture lubricant oil purifiers, transformer vacuum pumps, dry air generators, and other devices in addition to transformer oil purifiers. At YUNENG, you can purchase goods that suit your demands and budget.
YUNENG provides transformer oil purification systems with quality assurance, affordable pricing, and a variety of different models as a reputable manufacturer of transformer oil purification equipment in China. Additionally, it can be chosen and altered to suit your particular requirements.
The quality, dielectric strength, and physical and chemical qualities of transformer oil are improved by using a mechanical device called a transformer oil filter to remove moisture, gas, and solid contaminants. Transformer oil purifier is a two-stage vacuum transformer oil purifier made by YUNENG that can clean up unqualified electrical insulating oil in power plants, utility companies, railroads, metallurgy, petrochemical, and other industrial and mining businesses.
In addition to the 6000LPH model, Yuneng can also offer versions with flow rates of 1800LPH, 9000LPH, 3000LPH, 12000LPH, and 18000LPH.
You can choose a closed, open, or trailer-mounted transformer oil purifier depending on the operation conditions.
Transformer oil purifiers that are enclosed are appropriate for outdoor use.
Open type: An oil filter with an open design is appropriate for usage inside.
When a machine needs to be relocated from one location to another, the trailer type oil purifier is appropriate.
If you need one, get in touch with YUNENG. Different types of transformer oil purifiers can accommodate your needs in various settings.
Esimtech has collaborated on the development of the portable drilling well control simulation training system. It specializes in simulation training for well-controlled systems and has the traits of simple mobility and ideal functionality. Standards set by the IADC and IWCF are met by the system. Training may be more targeted and adaptable when different drilling factors, such as drilling tool structure, well structure, formation characteristics, and equipment parameters, can be easily set.
The software system uses a non-sequential design to replicate different drilling rig operations accurately, bringing the system closer to reality. Create a realistic perception environment using virtual reality technology. Adopt 3D animation that is timed to the operational environment. Combine this with simulated on-site acoustic effects to create an immersive experience for users.
System features:
Full-featured operation interface
True 3D, interactive animation
Real and reasonable well control process simulation
Fully intelligent scoring, fair and just assessment
System technical parameters
real-time voice prompt
Friendly interface, simple operation, easy to learn and use
easy to carry
Fully adopt industrial grade components, the system is stable and reliable
System Job Items:
1. Shut-in operation
2. Killing operation
Esimtech produces a variety of oil and gas simulators, if you need, please contact us.
FDM works on the basis that different hot-melt filament-like materials, such as wax, ABS, and nylon, are heated and melted, and a computer is used to control the nozzle's movement in the x, y, and z directions. Extrusion of the filamentary material occurs through a nozzle with tiny nozzles after the material is heated in the nozzle to a temperature just over its melting point.
The basic idea behind SLA is to move vertically to the height of one layer in the direction of the lifting platform, cure the next layer, and then focus the laser with a certain wavelength and intensity on the surface of the light-curing material.
How should I decide between FDM and SLA 3D printing?
When creating inexpensive models, choose FDM.
fantastic for makers and hobbyists.
in circumstances where precision and surface roughness are not crucial.
If fine features and smooth surfaces are desired, use a SLA.
It is useful for large production since casting molds are made using it.
I hope you will get in touch with JTR when you wish to print in accordance with the drawings because we provide a variety of 3D printing services.
For staff members in the sector to study on, Esimtech has created and built anoil production simulator and a gas production simulator.
Produced by Esimtech, Gas Production Simulator
The training of junior workers, intermediate workers, senior workers, technicians, and senior technicians can all be done using the gas production simulator, which combines computer technology, virtual reality technology, petroleum engineering, oil and gas storage, and transportation engineering.
Students can comprehend the internal workings and basic principles of different gas producing machinery.
The equipment's operational status can be seen on the huge screen.
The gas production simulator uses a strict mathematical model, real-world three-dimensional interactive animation, authentic environmental sound effects, and real-time voice prompt.
Produced by Esimtech, Oil Production Simulator
The oil production simulator is built on cutting-edge technologies including distributed control, virtual reality, 3D projection, and field bus connectivity. In order to achieve various skill training and target assessments for oil production employees and water injection workers, it can display all station process links in the area of oil production engineering and their relationships.
The system can adopt rigid mathematical models, preset flaws in the training process, and display the profile of a single piece of equipment.
The technology has the ability to automatically assess and judge how well the trainees performed, printing the final score.
Low operating and maintenance costs as well as the ability to stop pupils from accidentally destroying the instructional tools.
The method can be used in conjunction with the current training program to assist students in making a smooth transition from classroom instruction to practical equipment use.
1. Distinctions Among Processing Objects
Lathe processing, which is a subset of mechanical processing, is referred to as turning. The principal purpose of a lathe is to process rotating workpieces using turning tools.
The goal of milling is to fix the blank, cut on it with a high-speed rotating milling cutter, and remove the necessary features and shapes. The majority of the time, simple contour elements like contours and grooves are milled using traditional methods.
2. Various Functions
Using the rotation of the workpiece in relation to the tool on the lathe, turning is a technique for cutting the workpiece. The workpiece, not the tool, is what actually does most of the turning.
Three-axis or multiple axis milling and boring can be done using the milling and boring machining center. used for producing thin-walled complex curve surfaces, inspection tools, tire molds, processing molds, etc.
3. Various Operating Principles
Changing the subject:
The machine tool's spindle drives the workpiece to rotate as the primary motion during turning.
The turning tool that is firmly gripped on the tool holder moves the feed.
Milling tenet:
rotational milling cutters are used during the cutting process.
A milling machine or a boring machine is typically used for milling, and these machines are ideal for machining planes, grooves, unique
Four. Various Application Objects
The most fundamental and popular processing technique for cutting is the lathe. Turning can be used to process both spinning and circular surfaces. The majority of objects with rotating surfaces are machineable.
Molds, inspection molds, tire molds, and intricate thin-walled curved surfaces are just a few examples of the complex shapes and features that the milling center can process.
We have essentially comprehended the distinction between turning and milling through the foregoing explanation. JTR can offer CNC machining, metal stamping, injection molding, 3D printing, and other services as a skilled manufacturer offering high-quality quick prototype and large-scale manufacturing services. Additionally, we have a wealth of production expertise in this area.