© Copyright khedmeh Wall
The regular operation of machinery and equipment will be ensured by engine oil. However, with time, the equipment will typically oxidize and rust, the airborne water vapor will seep into all of the equipment's components, and the oil will also become contaminated. Oil contamination primarily occurs in the following two circumstances:
Water contamination: Water is the primary catalyst for corrosion, which might need costly equipment replacement and/or upkeep. The presence of water in the oil can lead to metal-to-metal contact and micro-pitting corrosion on the metal surface. Steel pieces become more brittle and prone to fracture as a result. It also lessens the lubricity and viscosity of oil.
Solid pollution: A variety of operational issues can be brought on by solid particles. Greater than a specified spacing size, particles will Particles larger than the gap size may obstruct the flow, while smaller particles will cause erosion and wear, which may completely close the gap and create microcracks. The most dangerous solids are those whose dimensions are slightly larger than or very close to the dynamic tolerances between moving parts. They may result in failure due to abrasive wear and surface fatigue.
An oil purifier can be used to remedy many issues. The equipment runs more efficiently when the engine oil is clean. The advantages of employing an oil purifier for purification are generally as follows:
Oil contaminants and water should be removed all at once.
solids that are thoroughly clean, even minute particles
Low maintenance costs and an extended oil purifier lifespan
prolong the equipment's useful life
cut back on environmental contamination
How Does an Oil Purifier Operate, Second?
What would happen if you placed a bucket filled with water and contaminated oil in a peaceful area? The oil will eventually separate from the water, as you will discover after a while. The solid particles will likewise sink to the bottom if they are heavy enough.
Oil will float on water because of the difference in specific gravity or density. Solid objects that weigh more than water will sink. However, the aforementioned procedure is time-consuming. Additionally, the oil and water may not be adequately separated if the mixture's density is very near.
The oil purifier operates on the same concept as a water or dirt separator, but it removes surplus contaminants more thoroughly thanks to high vacuum and multi-stage filtration. The vacuum oil purifier is ideal for vacuum oiling, vacuum pumping, and oil treatment because of its great filtration precision. Dehydration and degassing of oil, as well as the removal of free and soluble water, free and dissolved gases, and particulate matter, are accomplished using the high vacuum process.
The maker of the oil purifier will determine the equipment's precise structure. The most typical form holds the particles together with a conical plate. Larger produced particles will be significantly heavier and easier to separate from the oil.
3. What Purpose Does The Oil Purifier Serve?
Vacuum oil purifiers typically perform the following conventional functions, while other oil purifiers may have slightly different purposes:
It is a physical purifying procedure throughout. It is possible to extract the oil without harming its additives.
Easy to maintain, fault alarm, and display screen.
Put it through the primary purifier to remove bigger impurities, then use a heater to heat the oil to the desired temperature.
In the effective separation tower, a formed oil film region gradually forms as the heated oil enters the vacuum chamber and is atomized by the atomized atomization.
Quickly vaporize in a vacuum to achieve the separation of oil, water, and gas
A specialized oil transfer pump expels the separated oil into the fine purifier, where mechanical debris is removed to complete the purification cycle.
The process is completely enclosed, secure, and environmentally responsible.
Extra features:
One to three cycles of purification can be performed depending on the parameters of the crude oil.
A remote control, alarm, timer start, manual, automated, etc.
can eliminate decay products and discoloration caused by acids, sludge, free carbon, deep oxides, and other soluble oils.
Since its founding in 1997, our business, YUNENG, has provided services for the treatment of oil and gas.
UHV stations, transformer companies, and power generation companies, among others, have used YUNENG products extensively both domestically and internationally up until this point.
You may require a YUNENG transformer oil filtering machine, a vacuum pumping machine for the transformer, and a dry air generator for transformer maintenance for the transformer servicing company.
The basic descriptions of our main items are below:
1. Highly Effective Transformer Oil Purification Machine with Two Stages - The water, gas, and other contaminants might be eliminated. After treatment, it could potentially raise the breakdown voltage. It is appropriate for hot oil circulation drying, oil treatment, and transformer vacuum filling.
2. With Roots Pump And Vacuum Pump It is mostly used for vacuum drying and vacuumization when injecting oil in high voltage electrical transformers. Double Stage Transformer Vacuum Pumping Machine It has strong back suction, a quick start-up, a quick pump, reliable performance, and straightforward operation.
3.High Running Performance Dry Air Generator Providing Dry Air For Transformer Repair - This apparatus is appropriate for supplying dry air that protects the inner parts of power equipment from moisture during the maintenance of transformer, reactor, and other large power facilities. Working within the machinery won't be a problem for the maintenance team's oxygen supply. In comparison to nitrogen, it is more dependable, affordable, practical, and safe.
Please get in touch with us if you have any questions about YUNENG or would like further information. We'll email you soon.
Customers can choose different models of oil filter according to the specific filtering requirements. Advanced equipment, simple operation, helps deep filtration of transformer oil, and to the greatest extent to solve the troubles of transformer oil filtration.
Transformer oil filtration process
The online transformer oil filtering program is performed by the Transformer Oil Filtration Machine. During the transformer oil filtering process, the transformer oil enters the preliminary filter under the influence of the internal and external pressure difference, and the large particles impurities in the oil are filtered out in the early filter. The transformer oil is heated by multi -stage infrared vacuum oil device and enters the vacuum separator. In the vacuum separator, the fog first is formed, and then the film is formed, so that the contact area of the real vacuum expands hundreds of times the original.
The moisture in the transformer oil is quickly vaporized under high -speed, high vacuum, and large surface area and then discharged from the vacuum system.
The water vapor discharged from the upper part of the vacuum separator is first cooled through the condenser and dehumidified, and then entered the cooler to cool again. After two condensation and dehumidification, the gas is finally discharged into the air through the vacuum pump.
Vacuum vaporization and dehydration are raised from negative pressure to positive pressure through the oil pump, and discharged from the oil port after fine filtering.
The above is the standard program for Transformer Oil Filtration.
Transformers are used in order to convert high voltage grid power to the proper level to operate machines and appliances safely. In order to maintain the working life of the transformer for a long time, it is necessary to use clean and high-quality transformer oil.
Transformer oil ages over time and becomes contaminated with many contaminants such as moisture, gases, metal dust, acids and other contaminants. In order to purify contaminated transformer oil, it must be filtered. The transformer oil purifier is used to purify the transformer oil in this case.
The working process of transformer oil purifier
The filtration process of transformer oil is used to remove gas, particles, sludge and moisture from the oil. This process also improves the acidity of the oil.
The transformer oil purifier used to purify transformer oil first raises the temperature of the oil to 75 degrees Celsius.
In the second step, dirt and sludge are removed from the transformer oil:
1. Use a filter candle: Use a depth or classic edge filter to filter the transformer oil through the filter candle.
1. Use centrifugal method: This method can help remove dirt from transformer oil without changing the filter again and again.
Moisture and gases are then removed from the transformer oil.
Transformer Oil Purifier Manufacturer
If you are looking for a reliable company that manufactures transformer oil purifiers, YUNENG is the best. YUNENG is one of the top oil purifier manufacturers in China. Based on our long-term experience and expertise in this field, we have been manufacturing transformer oil purifiers in China for a long time.
Virtual reality technology refers to the combination of computer technology, electronic information technology and simulation technology and other advanced technologies. It is mainly based on computer technology, and comprehensively uses high-tech such as three-dimensional graphics technology, multimedia technology, simulation technology, etc., with the help of computers and other equipment to generate a realistic three-dimensional virtual world. It can make people in the virtual world feel immersive. With the continuous development of VR technology, VR technology has begun to play a role in all walks of life, including the oil and gas industry.
Virtual reality technology has gradually become a new training method. Through virtual reality technology can help students create a vivid learning environment, so that students can enhance memory through real feelings. Using this virtual reality learning environment for autonomous learning is easier for students to accept, and it is easier to stimulate students' interest in learning. In addition, some universities and laboratories have begun to use virtual reality technology to establish subject-related virtual training systems to help students learn and train better.
Through the interactive operation and immersive experience of Device Virtual Assembly, trainees can learn the internal structure, working principle and assembly method of drilling and well control devices in a targeted manner. Through practical training, students can be familiar with the various components and working principles of the equipment, and then be able to analyze the working situation and troubleshoot.
The products can provide customized services, and virtual assembly of various equipment can be carried out according to the different needs of customers.
If you would like to learn more about virtual reality technology and oil and gas simulation training, please contact Esimtech.
The application of VR technology to the training field brings a new learning experience to people in the oil industry. Promoted the rapid development of safety training in the oil industry.
The application of VR technology in the oil and gas industry is mainly used for emergency drill simulation, oil and gas operation simulation, oil equipment assembly and disassembly, process testing and inspection, etc.
The emergency drill (VR) training platform manufactured by Esimtech is developed based on the emergency drill software platform for the drill and test of emergencies in the oil and gas industry. Through VR interaction and immersive experience, trainers are able to develop their psychological qualities before some unexpected events. The emergency drill simulation training can train emergency events including blowout, explosion, H2S leakage, etc.
Through the training and testing of emergency drills (VR), the ability of trainees in emergency event prediction, event handling, and emergency escape can be improved.
If you would like to learn more about virtual reality technology and oil and gas simulation training, please contact Esimtech.
Pure SF6 gas is colorless, odorless and basically non-toxic. But once the purity is not enough, mixed with toxic impurities, or under the action of high-power arc, spark discharge, corona discharge, SF6 gas will decompose and release a variety of toxic substances. It is assumed that SF6 is not properly controlled during use or that there is a leak during gas recovery. It not only pollutes the environment, but also adversely affects the normal operation of electrical equipment and the health of employees. Therefore, we need to carry out SF6 gas recovery correctly and safely.
YUNENG's SF6 gas filling equipment consists of SF6 compressor, vacuum pump, vacuum system with oil-return prevention device, condensation system, liquid storage tank, purification system with built-in regeneration drying filter, and instrument panel and other auxiliary facilities.
It is used in industries that use SF6 gas to insulate electrical equipment, and can vacuumize various electrical equipment and recover SF6 gas.
The recycling and purification charging and discharging device is suitable for SF6 electrical appliances and GIS combined electrical appliances.
What is the function of SF6 gas recovery filling machine
1. Vacuum and measure the equipment itself, SF6 switch and GIS;
1. Recovery and treatment of SF6 gas in electrical equipment;
1. Treatment of SF6 gas: drying and purification;
1. Compressed liquid storage of SF6 gas.
YUNENG's SF6 gas filling equipment can solve the problem of filtration and refilling of SF6 gas for you. If you need it, please contact us.
The transformer oil vacuum oil purifier adopts advanced components, which can greatly improve the dehydration and degassing efficiency.
YUNENG's transformer oil vacuum oil filter is designed according to the different boiling points of water and oil. The oil purifier consists of a vacuum heating tank, a fine filter, a primary filter, a vacuum pump, an oil drain pump and an electrical cabinet. The vacuum pump draws out the air in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the oil enters the prefilter through the inlet pipe to remove larger particles, and then enters the heating tank, and the oil heated to 40-75 ℃ enters the vacuum In the tank, the water in the oil quickly evaporates into water vapor and is continuously sucked into the oil-water separator by the vacuum pump. The water vapor in the separator is cooled and reduced to water and then released.
Transformer oil vacuum oil purifier produced by YUNENG is deeply loved by domestic and foreign customers
Oil drilling well control is an extremely important link in the process of oil and gas exploration and development, and it is also the premise and guarantee for the safe production of oil and gas.
Drilling & well control simulation training system can show the real oil drilling production site and cultivate students' relevant knowledge and skills. Esimtech builds comprehensive 3D drilling and well control simulations. The scene of oil drilling work is shown, which improves students' perceptual awareness.
The Drilling & well control simulation training system series produced by Esimtech includes Portable Drilling Well Control Simulation Training System, Cyberchair Drilling Simulator, Top Drive Simulator, Drilling Simulation Training System, Land Rig Installation Simulator, and more. In addition, product functions can also be customized according to customer needs, mainly to train students or related practitioners in related majors.
Hope you can feel free to contact us to learn more about oil and gas simulation system.