© Copyright khedmeh Wall
SVR Global is the best Non Rising Stem Gate Valve Manufacturer in USA . It supplies premium valves to the pipeline, oil and gas, and chemical industries in Alaska, California, and San Jose. The non-rising stem gate valves are referred to as fixed-stem gate valves, revolving-stem gate valves, or blind-stem wedge gate valves. The non-rising stem gate valve is not the same as the Rising Stem Gate Valve. When the gate is either open or closed, the stem doesn't move a bit. Non-Rising Stem Gate Valves are suitable for services with high pressure and high temperature due to the small size compared to other valves; this valve can operate at restricted places.
A non-rising stem gate valve is characterized by a design that has a stem threaded in the gate, a bonnet covers the stem, and a valve body that carries the gate along with the passage of flow. These valves are more compact and proper for installations that have limited vertical space since the rising of the stem is not necessary. Normally, packing is used to seal the stem to end leaks. Application of the non-rising stem gate valves can be wherever space is limited and the application requires underground space, like the water mains and pipelines. They are suited for all kinds of industrial and municipal applications where maintenance space is not adequate and where external visual indication of the valve position is not needed because of their compact design and reliability.
Applications
Water supply and treatment: used in water treatment plants, reservoirs, and pumping stations to regulate the flow of water and isolate sections of the system for maintenance and repair.
Oil and gas industry: used in pipelines, refineries, and other oil and gas processing facilities to control the flow of crude oil, natural gas, and other fluids.
Power generation: in power plants to regulate the flow of water, steam, and other fluids used in power generation processes.
Chemical and petrochemical industry: used in chemical and petrochemical processing facilities to control the flow of various chemicals and gases used in manufacturing processes.
Mining industry: the mining operations regulate slurry, water, and other fluid flows associated with mineral processing.
Fire protection systems: to control the flow of water or other fire extinguishing agents applied in extinguishing fires.
SVR Global, the Non Rising Stem Gate Valve Manufacturer in USA delivers the product with utmost customer satisfaction and top-notch quality and serves in following industries:
Oil and gas Industries
Manufacturing Industry
Automotive Industry
Chemical Industry
Petrochemical Industry
Power generation
Pulp and paper
Oil and gas
Refining
Marine Industry
Advantages:
Excellent shut-off capability
Low pressure drop
Bi-directional flow
Simple and reliable design
Good flow control
Can be used in high-temperature applications
Description
Available Materials: Casting Steel (WCB, WC6, LCB, WCC, LCC, WC9), Cast iron, Ductile iron
Class: ANSI 150 to 2500, PN10 to PN450
Connection type: Buttweld, Flanged, Socket weld , Threaded
Size: 1/2” to 48”
Operations: Handwheel operated, Gear Operated, Electric Actuated, Pneumatic Actuated
Visit our website for more information-
https://www.svrglobal.net/product-category/non-rising-stem-gate-valve/
SVR Global is the reputed Forged Steel Check Valve Manufacturer in USA and supplies good quality valves to marine industries, wastewater industries and chemical industries. A forged steel check valve is produced from forged steel, which is heated and shaped under intense pressure. It is suitable for high-pressure and high-temperature applications due to its strength and longevity.
By allowing fluid to flow in one direction while preventing backflow in the other, this valve regulates flow. A spring or other mechanism holds the valve's disc or ball, which is free to move inside the valve body. The disc or ball separates from the valve seat while the fluid is flowing in the desired direction, allowing the fluid to pass through. The disc or ball is forced back onto the valve seat in the event of backflow, stopping the fluid from flowing in the opposite direction. They can be utilized in high-pressure and high-temperature applications and come in a variety of sizes and pressure ratings.
PARTS
· Body
· Hinged disc
· Hinge pin
· Seat
· Stem
· Bonnet
SVR global is the premium quality forged steel check valve manufacturer in USA , and these valves are efficient in preventing backflow and widely used in many industries.
· Chemical Industry
· Pulp and paper Industry
· Marine Industry
· Mining Industry
· Power Generation Industry
· Oil and Gas Industry
· Nuclear Industry
· Petrochemical Industry
APPLICATIONS
· Oil and gas industry: Forged steel check valves are commonly used in the oil and gas industry to control the flow of fluids in pipelines and other equipment, and to prevent backflow.
· Petrochemical industry: Forged steel check valves are used in the petrochemical industry to control the flow of fluids in chemical processing and refining, and to prevent backflow.
· Power generation: Forged steel check valves are used in power generation applications, such as steam and gas turbines, to control the flow of fluids and prevent backflow.
· Water and wastewater treatment: Forged steel check valves are used in water and wastewater treatment applications to control the flow of fluids and prevent backflow.
· Mining industry: Forged steel check valves are used in the mining industry to control the flow of fluids and prevent backflow in pipelines and other equipment.
FEATURES
• Enhanced durability
• Corrosive Resistance
• Easy and safe installation
ADVANTAGES
· Prevents backflow
· Mechanically very easy to use.
· Maintains optimal pressure
· Can be used horizontally as well as vertically
· Allows a full flow without any disturbance
· Very low cost
Body Material- Cast Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), duplex and super duplex STEEL [ F51, F53, F55 ] Forged Steel A105, F22, F51, F53, F55, F91, F304, F316)
Size- ½” – 80”
Class-150 – 2500; PN10 – PN-450
Ends-threaded, socket weld, butt weld, flanged, lug, wafer
Visit our site for more information- https://www.svrglobal.net/product-category/forged-steel-check-valve/
SVR Global is the top Ball valve manufacturer in USA. A ball valve regulates the flow of fluid (liquid or gas) via a pipeline using a disc with a ball-like shape. When the valve is open, the fluid can travel through a hole in the centre of the ball. When the valve is closed, the ball rotates 90 degrees, restricting the fluid flow completely by making the hole perpendicular to the flow. Ball valves are ideal for a variety of applications because of their excellent dependability, long lifespan, and simplicity of use. Due to their dependability, longevity, and convenience of use, ball valves are often utilised in a variety of applications.
To operate a ball valve, you typically turn a handle or lever attached to the ball. When the handle is parallel to the pipe, the valve is open, and the fluid can flow freely. To close the valve, you turn the handle perpendicular to the pipe, which rotates the ball to block the flow. Ball valves are commonly used in plumbing systems, industrial applications, and in the oil and gas industry because they are durable, easy to operate, and provide tight shut-off when closed. They are also available in a variety of sizes and materials to suit different needs and environments. SVR Global, the Ball valve manufacturer in USA manufactures ball valves which can be used for highly corrosive or viscous fluids that solidify at room temperature.
Parts:
● Body
● Seal
● Seat
● Gasket
● Handle
● Handle Retainer nut
● Rotary ball
● Stem
● Bonnet
● Spring
Types:
· Trunnion Ball Valve
· Double Block and Bleed Ball Valve
· Fully Welded Ball Valve
· Jacketed Ball Valve
· Forged Steel Ball Valve
· Cast Iron and Cast Steel Ball Valve
· Floating Ball Valve
Industries:
● Natural Gas Industries
● Manufacturing Sectors
● Chemical Storage Industries
● Oil & Gas Industries
● Textile Industries
● Mining Industries
● Marine Industries
Applications:
· Oil and gas
· Chemical processing
· Water and wastewater treatment
· Power generation
· Pulp and paper
· Marine and offshore
· Aerospace
Advantages:
· High strength: Forged ball valves are made using a forging process that results in a stronger and more durable valve compared to those made using casting or machining methods.
· Corrosion resistance: Forged ball valves can be made from a range of materials that offer excellent corrosion resistance, including stainless steel, alloy steel, and other exotic alloys.
· Precise flow control: Ball valves provide precise flow control by rotating the ball to either block or allow flow through the valve.
· Easy operation: Ball valves are easy to operate and require minimal maintenance, making them a popular choice in a wide range of applications.
· Quick opening and closing of valves.
Description:
Body Material: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron.
Class: 150-2500, PN10 to PN450
Size: DN15 TO DN1200
Operations: Lever operated ball valve, electric actuated ball valve, pneumatic actuated ball valve, gear operated ball valve
Ends: threaded, socket-weld, flanged, buttweld
To know more about various valves offered by SVR Global visit: https://www.svrglobal.net/product-category/ball-valve/