© Copyright khedmeh Wall
The dust removal bag is the main core component of the Function of Cyclone Separator. Its service life is generally 1-3 years. The cost of replacing the dust removal bag is the main cost of the Function of CyClone Separators. Bags, especially if the filter bag is not appropriate, it will be damaged or blocked seriously. The replacement is more frequent, resulting in the high maintenance cost of the bag dust collector and the life of the use of the dust removal bag. For maintenance costs, everyone wants to know how to extend the life of the dust bag bag. Shenzhen Hongjia Environmental Protection will summarize it with more than ten years of production experience:
1. To investigate the cause of the aging of dust bags, take elimination measures and replace the dust filter bag.
① Hardly and contracted due to abnormal high temperature;
② Due to the contact reaction of steam with acid, alkali or organic solvents;
③ React with water.
2. The blockage of the dust bag bag. When the cloth bag is blocked, the resistance is increased, which can be expressed from the increase of the number of pressure meters.
The clogging of the cloth bag is the main cause of the phenomenon of worn bag wear, perforation, and falling off. The following measures are generally taken:
① Temporarily strengthen the ash clearance operation to eliminate the blockage of the cloth bag;
② Some and all cloth bags must be replaced in time;
③ Strictly ensure the premise of adjusting installation and operation.
3. Damage of the filter bag. The shape of the filter bag and the installation method of the filter bag and the mechanism of the institution determine the position where the filter bag is easily damaged. However, the filter bag is damaged by the following reasons. If the damage occurs, it can be checked in the table below:
① The filter cloth should not be too loose or too tight, too loose is easy to accumulate, and it is easy to pull it too tight.
② New and old filter bags should not be mixed to avoid different damage time affecting the normal work of the device.
③ The filter bag that is replaced first, first use the compressed air to blow, and then check whether there is a hole in the hole. If the filter bag that is passed by dust, rinse with water, and leave it to be replaced after cooling.
function of cyclone separator https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html
SUPPLY SOCKET MOLD is a computer video, network, power supply, DVI, HDMI and other interface connectors. , "Plastic connection", "lift cover", "desktop edge", "slider docking", "panel embedded" and other structures. The new products add another Bluetooth transmission, and the audio transmission is everywhere.
SUPPLY SOCKET MOLD can be easily installed in almost any table. This solid and reliable wiring panel structure is very compact. It uses high -quality interfaces to use convenient use and good transmission effects. The finished line cable (such as VGA cables, USB cables, network cables, etc.) use custom cables to ensure quality. Product cable. Minimize the installation time and workload.
After the wiring panel is installed, it can be kept flat with the table. The user presss the top of the wiring panel to release a mechanical lock, and the wiring panel quickly bounces up (vertically, or with a 45 -degree angle with the table). All the required power, network, video, audio, USB, Cannon and other interfaces on the wiring panels are clearly integrated, which is clear at a glance to facilitate users to use.
When the user leaves and does not need to use the socket, you can press the top of the panel gently, sink the panel and automatically lock, so that the entire desktop will be restarted.
It is convenient to use and neat and beautiful. This is the biggest difference and advantage of the SUPPLY SOCKET MOULD compared to traditional exclusive insertions. However, correspondingly, the price will be much higher than the traditional row.
supply socket mould https://www.tangrammould.com/Wall-Gang-Switch-Mould.html
Medical Endoscope Camera Module transmits images through high -quality light -guided fiber bundles, and uses another -group optical fiber bundle to achieve the transmission of light sources. Add a objective mirror and a eyepiece and control part at both ends of the optical fiber bundle to form a Medical Endoscope Camera Module can be directly observed through the mirror, and the outer layer of the endoscopic uses metal woven tungsten pipes. Each Medical Endoscope Camera Module includes the insertion department (including the apex, the bending part, the soft part), the operation department (the control device with the angle of the probe), and the eyepiece part.
Medical Endoscope Camera Module optical fiber optical light is achieved by the full reflection of light. The light is shot into the incident end surface of the fiber in the fiber angle. After the refraction is refracted with the corner of the cricket, it enters the fiber of the fiber and reaches the smooth interface between the core and the coat. Full reflection. From the same angle, the full reflection light has occurred at the relative interface, and the third time ... If a thousand full reflexes, that is, the light forms a guide wave in the fiber until the surface of the other end of the fiber (that is, the end surface of the outlet surface (that is, the end surface of the outlet surface, ) Shoot.
Many single -rooted filaments are arranged neatly into fiber bundles so that they can correspond to one -one -one -one -one -one -end surface and outlet end. The end surface of each fiber can be regarded as a portrait unit. In this way, the image can be transmitted from the incident end surface to the end surface after the fiber beam. This is the principle of light -guided fiber.
medical endoscope camera module https://www.hengal-tech.com/4-5mm-medical-endoscope-camera-module-4-5mm-pshow/17.html